Shop all collections
Showing all 38 results
Autumn birch tree ring ~ silver and gold with orange garnet
This is the Autumn birch tree ring. These are a series of rings made to denote the turn of each season from one to the next. This one with its deep gold hue represents the falling of amber leaves as each tree gives up its new growth, and each leaf falls gently to the floor.
Three birch trees cut into silver and filled with a soft grey enamel. I have handmade this silver cabochon from scratch and cut each tree out. I have flush set the 1.5mm Orange garnet into place.
The cabochon is set into a 9ct gold claw setting. The bottom of the setting is silver. The silver represents the moon, the gold the sun.
The cabochon measures approx in height 9mm
Width is approx 1.3cm
Depth is approx 6mm
Finished in a soft matte satin.
The ring takes approx 4 - 6 weeks to make but please do contact me if you need sooner as I do carry some items in stock or maybe able to help.
If you are outside the UK and would like a ring I am more than happy to translate sizes - please contact me here.
The birch tree ring is boxed and wrapped and will be sent by tracked delivery.
Rings are fully hallmarked and as each ring is handmade there might be slight variations in detail for instance the trees may look slightly different. You can check out the other seasons and variation in detail here.
More pictures of the birch rings can be found here.
Birch tree necklace ~ silver and gold with blue topaz
The birch tree necklace denotes the turning of the seasons. Each one holds a precious stone representing the seasons. This one holding London blue topaz is Summer - blue clear skies and calm sparkling seas.
Cut into each silver handmade cabochon is three trees, enameled a soft grey. These are birch trees, a symbol of growth and renewal. Flush set in between the trees a London blue topaz.
The claw setting and bezel holding the trees is 9ct gold. The back is silver. The mixed metals represent the turn of day to night. Gold for the sun, silver for the night.
The chain is 9ct gold and approx 16.5 inches long. Please do let me know with your order if you would like a longer chain.
The piece measures approx 9mm in height and 1.2cm in width.
The finish is a soft matte brushed finish.
The necklace takes approx 4 - 6 weeks to make. Please do contact me if you would like sooner and I will do my best to help.
This necklace is also available with diamond, green sapphire, orange garnet. Again please do contact me for details.
Each one is handmade and therefor there may be very slight variation in detail. You can find pictures of recent pieces on my social media here.
Each necklace is fully hallmarked and comes boxed and wrapped.
Bird, birch and stars ~ silver, gold and enamel necklace
Bird, Birch and stars is the story of long journeys with only the stars as a guide. Some birds follow the stars - known as the star compass, some the sun. The bird flies, her wing tip almost touching a star as she makes her travels.
Made from sterling silver and framed in 9ct gold, each element hand cut and filled with enamel in a process called Champleve. Bird, birch and stars has two trees, one either side in a soft grey enamel, the bird in a blue-black. Flush set into the piece is a salt and pepper diamond as the star claw set et into 9ct gold. The chain is 9ct gold and the clasp is handmade.
The piece measures approx 1.5cm in width and approx 1.3cm in height, including bail 1.8cm. It comes with a 16 inch chain. Please let me know if you would prefer and 18 inch chain with your order.
Please do note that the piece is handmade and as such there may be slight variations in detail - i.e wings may be slightly different.
Bird, birch and star may take up to six weeks to make.
The necklace comes boxed and wrapped.
If you would like to see other bird pieces please click here.
I always love new followers click here to connect to me on social media.
Branches break ring ~ gold, silver, fine silver
Inspired by tree tops this branches ring is a one of a kind in design. Watching the autumn leaves fall, each one of these torch fired, hand drawn and as individual as the branches that inspire them.
First I have hand cut and made the cabochon and layered white enamel over the silver, firing each one carefully. Layered and torch fired repeatedly the enamel takes on different tones - soft off white and greys giving depth. I have then drawn on the image from a series of sketches made looking at trees. Firing it then becomes permanently embedded in the enamel.
The setting is also handmade by me and bezel set in 9ct gold. Sterling silver backs the setting. Represented by gold the day and silver is the night - symbolic of the passing of the days and seasons a reoccurring theme in my work.
The shank of the ring is approx 1mm thick and approx 2mm depth. The setting is approx 1.3 width and approx 0.75mm in height.
The ring is a UK size N.
Please do note that the ring cannot be resized.
The ring is fully hallmarked.
To see other tree jewellery please click here.
Deer in the woods ~ silver and 9ct gold necklace
These are the keepers of the quiet places. This deer piece is inspired by encounters with these shy creatures that roam the woods.
A simple gold deer in a silver frame.
This is a petite pendant measuring approx 1.9cm in height
Width is approx 1.8cm at the widest point.
Depth is approx 3mm
The pendant is finished in a soft matte finish with a 'skyscribble' texture.
The chain can be any length you choose. The default is 18 inches long. It is sterling silver and has a handmade clasp.
Make time is up to 4 weeks, though currently I have one in stock which could be sent in 1 - 3 business days - so please do contact me if you need this sooner.
Please note this piece is handmade and consequently it means that there will be small variations in detail. Although some details are likely to vary, quality won’t be compromised.
This necklace is fully hallmarked and comes boxed and wrapped.
“I sometimes see a Roe passing like a shadow through the trees or staring at me from a distance from some sequestered glade;” John St Clair
Deer in the woods ~ silver necklace
These are the keepers of the quiet places. This deer piece is inspired by encounters with these shy creatures that roam the woods where I make my designs. That moment when you are walking through the trees and just happen to catch a glimpse of an unsuspecting deer - a magical moment. To me they represent so much more about being still and listening to what is around you and what is inside.
Eight birch trees each textured and in front of this one Roe deer.
Height is approx 2.2cm including bail 2.6cm
Width at the widest point is 2.1cm
Make time is up to 6 weeks.
The chain is available from 18 inches to 24 inches - please let me know what you would like with your order. The default length is 18 inches.
Please note this piece is handmade and consequently it means that there will be small variations in detail. Although some details are likely to vary, quality won't be compromised.
This necklace is fully hallmarked and comes boxed and wrapped.
"I sometimes see a Roe passing like a shadow through the trees or staring at me from a distance from some sequestered glade;" John St Clair
For a full description please read on below.
Flying owl ~ silver necklace
The flying owl silver necklace is hand cut. Here the owl flies free, wings outstretched upwards mid flight. Engraved with feathers and two eyes, all marks individually made. Finished in a soft matte.
The owl necklace measure approx 1.7cm width from wing tips and the deepest part measures approx 2.5mm.
The chain shown in the picture measures approx 16 inch. You can choose whichever chain length you would like - please let me know with your order.
Each silver owl necklace is handmade and as such means there may be very slight variations in each.
The necklaces comes boxes and wrapped. Please allow up to 4 weeks from make to dispatch time.
To see more owl jewellery check out here.
To see more pictures or to follow me on social media please click here.
Fox and shimmering star – silver and 9ct gold necklace
The moment between day and dusk just as the first star appears and a fox which sits on a hill.
This necklace frame is inspired by shafts of sunlight falling through tree branches. At the back of the piece four trees sit on a landscape. Five trees in total on the silver pendant. Three wild foxgloves standing tall, in front a hill and the fox. The fox itself engraved with 'fur' and a closed eye. A gold star shimmers in the top right of the piece, the star moves gently as it is worn or shook.
The jewellery piece is sterling silver and each is fully hallmarked. It is finished in a soft matte finish, textured 'skyscribbles' too. The star is made from 9ct gold.
The chain is sterling silver and has a handmade clasp. The chain can be whatever length you like - please do let me know. The default chain length is 18 inches. I have made the pendant bail so that once on the chain it cannot slip off the end.
The necklace measures from top to bottom it approx 1.9cm
Width is approx 2.2cm
Depth is approx 0.7mm
Make time to dispatch is between 4 - 6 weeks.
The piece is fully hallmarked.
Please note this silver fox and gold star necklace is handmade, therefore there will be small variation in details. Although this piece may differ in detail, quality wont be compromised.
Each piece of jewellery is handmade in my workshop in Cornwall.
The fox and star comes boxed and wrapped and is free post.
Fox and shimmering star ~ silver and diamond necklace
A tiny fox and star necklace - the fox sits at dusk in the woods as the sunlight fades and the first glittering star appears.
Have you ever noticed the way the dappled sunlight falls on the forest floor? The outer frame has holes in it symbolizing the suns ray through the trees. Four trees curve and bend at the back of the piece and in front of this a curved hill bends, then a single tree. Three wild foxgloves spring up and finally a fox sat, waiting patiently. The fox is engraved with 'fur' and has one closed eye.
A tiny star hangs in the top left corner. The star is a flush set ethically sourced diamond 1.5mm.
Pieces are designed so when they are in a place where the sun falls, they will create a long shadows.
The fox and star necklace is finished in a soft matte satin finish.
The chain is silver and available in a variety of lengths - the default is 18 inches but please do let me know with you order what your preference is.
From top to bottom this piece measures approx 1.9cm
Width is approx 2.2cm
Depth is approx 0.7mm
Each fox and star necklace is handmade from start to finish so details may vary very slightly.
This necklace comes boxed and wrapped and is sent by tracked delivery.
The jewellery is sterling silver or eco silver when available (The same quality/properties as sterling) and fully hallmarked.
This piece takes between 4 - 6 weeks to make - please do contact me to check though as I often have pieces in stock.
The necklace is handmade in my workshop in Cornwall, UK.
I also make a hare and diamond star which can be found here.
Fox drop ~ silver earrings
One tiny silver fox sitting on the side under a star of these mismatched delicate tear drop bud earrings. Or the fox drop silver earrings!
These handmade earrings are hand cut and formed into the bud shapes. On one two foxgloves springing up and between them the tiny fox track trailing through from the top to the bottom of the earring. On the other another a single star and another track down to where the tiny fox sits patiently.
The tear drop shape represent buds of spring and summer appearing on the trees.
On the back of these earrings another engraved fox track - a small detail to add interest to the fox jewellery.
These silver drops measure approx 1.4cm in height and 1mm in depth.
They hang at approx 1.5cm.
The silver fox earrings come boxed and wrapped.
Each pair is handmade therefore their may be small variation in detail. However, quality will not be compromised.
Make time is approx 4 weeks.
Fox tail ~ silver ring with peridot
Two fox tails intertwined. Here I was thinking of fresh early mornings when the dew hangs on the grass.
Two silver fox tails cut into silver and each 'fur' detail engraved individually.
In the middle of the fox tails is 1.5mm faceted peridot which is flush set. The peridot is a very light green colour.
The ring measures approx 1.5mm thick
It is approx 0.5 - 0.6cm in depth
This silver ring pictured is a UK size N
Make time is approx 4 - 6 weeks
Each ring is handmade so there may be some variation in detail.
Tell your own fox tale.
Each ring comes boxed and gift wrapped.
If you like this piece you can see more fox jewellery here
Foxgloves – silver earrings
The silver foxglove drop earrings are in a soft edged rectangular frame. Each one with five foxgloves as shown in the pictures. The foxgloves are delicately hand cut one by one into the silver, no two are the same. The earrings are finished in a soft matte with a slight texture.
The foxglove earrings measure approx 2.4cm in height and 1cm in width varying slightly from top to bottom.
Each foxglove is between 0.6 - 0.7mm in height
Make time is approximately 4 weeks
The earrings come boxed and wrapped
The foxglove earrings make a great set with the fox and shimmering star pendant.
Hare and shimmering star ~ silver and 9ct gold necklace
This silver hare necklace is about the moment between day and dusk and the first star appears, a hare sits and waits and dreams.
The silver hare necklace frame is inspired by shafts of sunlight that hit the wood floor creating pools of light. On the back of the silver necklace four trees, then in front of this a hill, another silver tree and then brambles climbing up inside the necklace. Another silver layer and finally, the hare. The silver hare has engraved 'fur' and one eye blissfully closed. On the back of the pendant I have engraved the trail of the hares paw prints moving across the landscape. The star, made of 9ct gold, moves with the wearer, shimmering gently.
Finally, I added a sky scribble texture to the piece, completely unique to these pendants and finished in a soft matte satin.
Each piece of this pendant is carefully and lovingly formed, hand cut and or engraved by myself in my workshop in Cornwall, UK.
The piece measures approx 1.9cm in height and 2.1 cm in width. The depth of the piece is approx 7mm.
This piece of jewellery comes with a chain length of your choosing. Please do let me know with your order what you would like.
The default chain length is 18inches.
Each is fully hallmarked.
The necklace comes boxed and wrapped.
The hare necklace is made to order and as such there may be slight variations in detail. The beauty of handmade.
The making process can take up to 6 weeks. Please do contact me if you need sooner and I will do my very best to help.
If you like this you might also like my fox and shimmer star, click here to view
Hare and shimmering star ~ silver and diamond necklace
The hare stretches upwards on the silver hare and diamond necklace, one paw raised. It bathes in the light of the first glittering star star in the sky that appears as the sun fades and dusk approaches.
The silver frame has holes of various sizes - a nod to the sunlight dappled on the woodland floor through branches. At the back four trees meet the top of the frame. In front of the trees a curving landscape, then another single tree. Brambles in front of this tangled and spreading for Spring. The hare sits, one eye closed and fur engraved individually by myself.
On the top left hand corner a small shimmering diamond star that moves gently as the wearer does. This star is an 1.5mm ethical diamond flush set.
On the back I have engraved paw prints.
Hare and star jewellery pieces are designed so that when when the sun catches them on a shelf they will cast a long shadow. A necklace that can be enjoyed also when not being worn.
The silver hare and diamond necklace is approx 1.9cm in height
It is approx 2.2cm in width
It is approx 7mm in depth.
This is a handmade piece so small details may vary slightly.
The silver chain is available in a variety of lengths 16, 18, 22, and 24 inches. The default length is 18 inches, please do let me know if you would like a different length.
This silver necklace is fully hallmarked and comes boxed and wrapped.
The piece itself takes between 4 - 6 weeks to make however if you need it sooner please do contact me as sometimes I have pieces in stock.
The jewellery is made in my workshop, by me, in Cornwall, UK.
I also make other fox and hare pieces which can be found here.
Hare and stars ~ silver and 9ct gold necklace
A stargazing hare sat bathed in light as the first stars appear and dusk turns to night.
A soft rectangular frame cut with holes of various sizes. The frame of this handmade jewellery piece is inspired by shafts of sunlight spilling through branches onto the forest floor. At the back of the landscape there are four trees. A hill in front of that and then another hill. Five trees in total. Some brambles on the right and in front of that, the hare looking upward. The hare is engraved with 'fur' and closed eye. Three gold stars in total hang at the top of the pendant.
The necklace is silver and is finished in a soft matte finish and textured with 'sky'. Each star is made from 9ct gold.
The chain is sterling silver and is finished with a handmade clasp.
From top to bottom the necklace measures approx 1.9cm
The Width is approx 2.2cm
The Depth is approx 0.7cm
Each silver hare necklace is fully hallmarked.
Please do note that as this is a handmade piece therefore it is likely that there will be variation in detail, however details vary, quality won't be compromised.
Make time is approx 6 weeks
The hare comes boxed and wrapped and is free post.
There are also earrings which are part of a set with this piece and can be found here.
Hares and star – silver and 9ct gold
The meeting place. Two hares meet under a single star.
A soft rectangular frame cut with holes of various sizes. Inspired by shafts of sunlight spilling through branches onto the forest floor holes in various sizes are around the frame. At the back of the landscape four trees sit. Five trees in total. A single bramble stretches up on the right and the hares looking at one another. The hares are engraved with ‘fur’. One star hangs in the middle at the top of the pendant.
The piece is silver, it is finished in a soft matte finish and textured with ‘skyscribbles’. The stars are made from 9ct gold.
The chain is sterling silver and is finished with a handmade clasp.
From top to bottom it measures approx 1.9cm
Width is approx 2.2cm
Depth is approx 0.7cm
Please note that as this is a handmade piece therefore it is likely that there will be variation in detail. However details vary, quality won’t be compromised.
Make time is approx 6 weeks
The hare comes boxed and wrapped and is free post.
Into the brambles ~ silver earrings
Delicate brambles, blossom and thorns hand cut into silver. The blossoms on the front of the earrings are see through and from the back look like drops or tears.
On every adventure there are obstacles to overcome. Thick spiky brambles overgrown and in the way of the path ahead. A way must be found over, under or through! It is not possible to go backwards so forward it is. Often it can be impossible to get through unscathed. However, a reminder that tears can turn to blossom too and fruit.
Petite drop earrings measuring approx 1.2cm in height from the middle, from the edge approx 1.4cm
Width approx 1.6cm
Depth approx 1.0mm
Finished in a brushed soft matte finish.
A bramble pendant which can be found here
Please note that these are handmade and as such will have variation in detail - i.e the cutting of the each bramble, even between each pair will be slightly different.
From ordering to make can take up to 4 - 5 weeks
Into the brambles ~ silver necklace
Delicate brambles, blossom and thorns hand cut into silver. The blossoms on the front of the pendant are see through and from the back look like drops or tears.
On every adventure there are obstacles to overcome. Thick spiky brambles overgrown and in the way of the path ahead. A way must be found over, under or through. It is not possible to go backwards so forward it is. Often it can be impossible to get by unscathed. However, a reminder that tears can turn to blossom too and fruit.
This is a delicate pendant measuring approx 1.2cm in height from the middle, from the edge approx 1.4cm
Width approx 1.6cm
Depth approx 1.0mm
The length of the necklace in total is approx 18 - 19 inches. However, It is possible to order different lengths so please do contact me and let me know what length is your preference if longer.
Finished in a brushed soft matte finish.
Bramble earrings can be which can be found here
Please note that this is a handmade piece and as such will have variation in detail – i.e the cutting of the each bramble, even between each necklace will be slightly different.
From ordering to make can take up to 4 – 5 weeks
The necklace comes boxed and wrapped and free post.
Into the brambles ~ silver studs
Delicate brambles, blossom and thorns hand cut into silver. The blossoms on the front of the earrings are see through and from the back look like drops or tears.
On every adventure there are obstacles to overcome. Thick spiky brambles overgrown and in the way of the path ahead. A way must be found over, under or through. It is not possible to go backwards so forward it is. Often it can be impossible to get through unscathed. However, a reminder that tears can turn to blossom too and fruit.
These are hand cut.
The studs measure approx 0.8 width
Finished in a brushed soft matte finish.
A bramble pendant which can be found here
Please note that these are handmade and as such will have variation in detail – i.e the cutting of the each bramble, even between each pair will be slightly different.
From ordering to make can take up to 4 weeks.
The studs come boxed and wrapped.
Into the woods ~ silver earrings
Three trees, two textured like birch set in a rectangular frame with curved corners and one tree on the front of the frame. The tree earrings are in a matte finish. Each delicate earring is a tiny woodland.
The earrings measure approx 0.9cm in height
Width approx 1.2cm
Approx 2.5mm depth
This piece is handmade to order so there may be variation in detail, although quality won’t be compromised.
Make time is up to 4 - 6 weeks.
These earrings comes boxed and wrapped.
Shall we go for a walk in the woods?
Where shafts of sunlight stream through the trees and light flickers and dances with shadows on the forest floor. Adventures await….
Looking for a necklace to go with this piece? You can find one here
Into the woods ~ silver necklace
Three trees, two textured like birch set in a rectangular frame with curved corners and one tree on the front of the frame. The tree necklace is in a matte finish.
The piece measures approx 0.9cm in height
Width approx 1.2cm
Approx 2.5mm depth
This comes on an 18inch sterling silver chain with a handmade closure. Longer chains are available at request.
This piece is handmade to order so there may be variation in detail, although quality won't be compromised.
Make time is up to 3 - 4 weeks.
The tree necklace comes fully hallmarked boxed and wrapped.
Shall we go for a walk in the woods?
Where shafts of sunlight stream through the trees and light flickers and dances with shadows on the forest floor. Adventures await....
Into the woods tree ring ~ silver and gold with diamond
A tree ring, a tiny wood and a single star out in the night sky.
The ring is made from silver and the trees are 9ct gold. Each tree is hand cut and formed by myself.
The star is a diamond and is ethically sourced.
The depth of the ring is approx 6mm
The thickness of the ring is approx 1.6mm
The size of the ring shown in the picture is a UK size O
Make time is approx 4 - 6 weeks
You can have as many or as little trees as you like in this woodland, If you would like 5 or more please contact me for details.
Feel free to contact me here
Into the woods/one ~ silver necklace
One tree set in a rectangular frame with curved corners. The tree is slightly textured. The pendant itself is in a matte finish.
The piece measures approx 1.2cm in height
Approx 2.5mm depth
It will fit on your fingertip!
This comes on an inch sterling silver chain length of your choice (16, 18, 20, 22 inches) with a handmade closure. Longer chains are available at request. Please let me know what you would like. The default length is 18 inches.
This piece is handmade to order so there may be variation in detail, although quality won't be compromised.
Make time is 3 - 4 weeks.
The tree necklace comes boxed and wrapped and is fully hallmarked.
Shall we go for a walk in the woods?
Where shafts of sunlight stream through the trees and light flickers and dances with shadows on the forest floor. Adventures await....
More trees can be found here
Into the woods/one tree ~ 9ct gold necklace
One gold tree set in a rectangular frame with curved corners. The tree is slightly textured. The pendant itself is in a matte finish.
The piece measures approx 1.2cm in height
Width approx 0.95cm
Approx 2.5mm depth
This comes on an 18 inch 9ct gold chain with a handmade closure. Shorter chains are available at request.
The gold tree necklace is handmade to order. Each necklace will have slight variations in detail. Each is unique, quality won’t be compromised.
Make time is up to 4 weeks.
The tree necklace comes boxed and wrapped and is free post.
Shall we go for a walk in the woods?
Where shafts of sunlight stream through the trees and light flickers and dances with shadows on the forest floor.
More trees can be found here
Owl and stars ~ silver and 9ct gold necklace
The silver owl necklace with three stars shining in the dark night sky. The owl is gliding silently above land and trees, wings outstretched, almost touching the stars as she flies.
Around the outer frame each circle represents dappled sunlight falling through the branches onto the woodland floor. Inside four trees at the back, followed by a curving hills, then one tall tree stretching to the top of the frame. A fern on the right hand side curling over, one more landscape and finally the owl in flight. Three shimmering stars at the top of the frame, each slightly a different length.
The owl is engraved with 'feathers' and two closed eyes.
Finished in a soft matte finish with a 'sky scribble' design.
This owl necklace comes with a chain of any length you choose. The one shown is on a 21 inch chain (Please do let me know when ordering if you would like a different length).
Designed so when in a place where sunlight falls it will create long shadows.
From top to bottom this piece measures approx 1.9cm
Width is approx 2.2cm
Depth is approx 7mm
This piece comes boxed and wrapped.
To see pictures of other 3d necklaces please click here.
Please note that each one is handmade an there may be sight variations in detail.
Please allow 4 - 6 weeks lead time to make.
Owl face ~ silver studs
Owl face silver studs measuring 6mm by 4mm. Sleepy little dreamers each delicate earring hand cut and engraved markings individually made.
Little silver owls for your ears.
These are a brushed matte satin finish.
The studs take up to approx two weeks from make to dispatch.
The earrings come boxed and wrapped.
Owl face studs ~ 9ct gold
Owl face studs made in 9ct gold. Little owls measuring approx 6mm x 4mm. Inspired by small things that whisper in your ear. Each hand cut and engraved.
Little gold studs for your ears finished in a soft matte.
The earrings take approx 4 - 6 weeks to make and dispatch and come boxed and wrapped.
They are also available in silver.
To see variations of the owl face studs you can see more here.
Reserved for Ana B – Birch necklace and ring
Birch tree necklace in silver and starry night ring in silver and gold - for Ana B
The birch tree necklace denotes the turning of the seasons. Each one holds a precious stone representing the seasons. This one holding a diamond – for winter, white skies and cool air. Cut into each silver handmade cabochon is three trees, enameled a soft grey. These are birch trees, a symbol of growth and renewal. Flush set in between the trees a London blue topaz. The claw setting and bezel holding the trees is silver The metal represent silver for the night. The chain is silver and a length of your choice. The piece measures approx 9mm in height and 1.2cm in width. The finish is a soft matte brushed finish. The necklace takes approx 4 – 6 weeks to make. A tree ring, a tiny wood and a single star out in the night sky.Into the woods ring
The ring is made from silver and the trees are 9ct gold. Each tree is hand cut and formed by myself. The star is a diamond and is ethically sourced. The depth of the ring is approx 6mm The thickness of the ring is approx 1.6mm The size of the ring shown in the picture is a UK size O Make time is approx 4 – 6 weeks You can have as many or as little trees as you like in this woodland, If you would like 5 or more please contact me for details. Feel free to contact me hereReserved for Zoe G ~ hare drops in silver
Reserved for Zoe L ~ Hare drops in silver
One tiny silver hare sitting on the side under a star of these mismatched delicate tear drop bud earrings. These handmade earrings are hand cut and formed into the bud shapes. On one two foxgloves springing up and between them the tiny hare track trailing through from the top to the bottom of the earring. On the other another a single star and another track down to where the tiny hare sits patiently. The tear drop shape represent buds of spring and summer appearing on the trees. On the back of these earrings another engraved fox track – a small detail to add interest to the hare jewellery. These silver drops measure approx 1.4cm in height and 1mm in depth. They hang at approx 1.5cm. The silver hare earrings come boxed and wrapped.
Seeing double stars nose stud ~ gold
Two shooting stars you can see any time (if you cross your eyes!) Best of all when its out the shooting star looks as though is has a tail.
This delicate nose stud is 9ct gold. It measures approx 0.6cm across. The wire is made from silver.
Handmade and finished to a soft brushed matte.
This star comes boxed and wrapped.
Make time is up to 2 weeks.
This nose stud also comes in silver.
Seeing double stars nose stud ~ silver
Two shooting stars you can see any time (if you cross your eyes!) Best of all when its out the shooting star looks as though is has a tail.
This delicate nose stud is silver. It measures approx 0.6cm across.
Handmade and finished to a soft brushed matte.
This star comes boxed and wrapped.
Make time is up to 2 weeks.
This nose stud also comes in gold.
Skyscribble ring ~ silver
The ring has a small cloud abstract detail textured into the silver and soft matte finish.
It is inspired by cloudy skies, thinking of the days spent watching the skies overhead and time moving from sunlight to sunset. I use this texture in my collection of pendants, here it is carved a deeper into the band ring.
Looks pretty on its own or stacked with other rings like the full moon ring shown.
Band width is approx 2.3mm
Height is approx 1.5mm
Making time is up to four weeks.
Please note that each ring is handmade so although details may vary slightly.
Skyscribble studs ~ silver and 9ct gold
Small soft edged square studs, lined with 9ct gold in the inner sterling silver frame and finished in a soft brushed matte.
Inspired by cloudy skies, thinking of the days spent watching the skies overhead and time moving from sunlight to sunset. These have small cloud abstract detail textured inside a square frame.
The earrings are measured at approx 0.7mm in height and width, each is slightly asymmetrical.
The earrings come with silver scroll back and come boxed and wrapped too.
Please note that these pieces are made to order and may take up to 4 weeks to make and post.
They also may have small variations in design detail although quality wont be compromised.
Inspiration for these pieces can be found here.
Every cloud has a silver lining...
Spring birch tree ring ~ silver and gold with green sapphire
Silver and gold birch tree ring with a faceted green sapphire flush set into the piece.
Three birch trees cut into silver. Thinking of the sap rising in trees and green leaves and buds unfurling as winter turns to Spring.
Three tiny trees are hand cut into silver, enamelled using a soft subtle grey opaque colour. Set into the sterling silver is a green sapphire.
The piece is set in a 9ct gold bezel with gold claws and onto a sterling silver back.
The ring shank is sterling silver.
The silver is finished in a soft satin finish.
Height measures approx 0.9mm
Width approx 1.3mm
Shank width approx 2.3mm
Make time is approx 4 - 6 weeks
Summer birch tree ring ~ silver, gold and topaz
This summer birch tree ring is the third in a series of rings denoting the turn of each season. Each one holds a precious gem which represents a season and the symbolism of that season. In this one a London Blue Topaz, a rich, sparkling deep blue for summer skies and seas.
Cut into each cabochon three birch trees, enameled a soft grey. These are birch trees, a symbol of growth and renewal.
Flush set in between the trees is the blue topaz.
The claw setting for the cabochon is 9ct gold with a gold bezel, a silver bottom and silver ring shank. The mixed metal denotes the turn of day to night. Gold for the sun, silver for the night.
The Cabochon measures in height approx 9mm
Width is approx 1.3cm
Depth is approx 6mm
The ring is finished in a soft matte brushed finish adding interest and detail to the overall appearance.
The ring takes approx 4 - 6 weeks to make. However, I do sometimes have some in stock if required sooner. Please do contact me if this is the case
Each one is handmade therefore there may be slight variation in detail. Click here to see other birch rings details on social media
Fully hallmarked, each comes boxed and wrapped.
If you are outside the UK I am more than happy to translate sizes - please do contact me for details.
Tree and moon ~ silver, enamel and gold necklace
Full moon and in the light a single tree stands. These one of a kind enamel pieces are the pages to where the stories begin.
Each one is a unique, each one an original. No two exactly the same.
The enamel is layered and fired several times. I hand paint each miniature onto the enamel. The enamel is torch fired and the image becomes fused with the enamel creating a permanent image.
The image is set in a soft rectangular box. I wanted it to appear as though set, like a picture in a frame. Look closely and you will see a 9ct gold shows just on the inside edge of the frame.
All finished in a soft matte.
This is a delicately small piece.
The frame measures approx 1.3cm, including bail approx 1.7cm
Approx 1cm in width
The pendant comes with a chain length of your choice (16, 18, 20, or 22 inches) with a handmade clasp. Please let me know with your order. The default length is 18 inches.
The necklace is fully hallmarked and comes boxed and wrapped.
Tree and moon ring – silver and gold
One full moon and a singe gold tree lit up in the its path.
The silver moon is an organic shape handmade approx between 0.8 - 1mm depth.
Each one of these handmade silver and gold rings are unique, no two are the same.
The width/length of the moon is between 0.8 - 1mm
Each tree is hand cut by myself and textured.
The shank of the ring is approx 2.3mm
Make time is approx 4 weeks.
Each ring is finished in a soft brushed matte.
This ring comes boxed, wrapped and postage is free.
Winter birch tree ring ~ silver and gold with diamond
The winter birch tree ring is the forth in a series of rings denoting the passing of each season. Each one holds a precious stone which represents the season, this one is winter cold, for snow and white skies.
Cut into each cabochon, three birch trees enamelled in a soft grey. These are Birch trees which are symbolic of regrowth and regeneration.
The ethically sourced diamond flush set into to place.
The claw setting is 9ct gold with a silver bottom. The Shank of the ring is also silver. The metal denotes the turn from day to night. Gold for the sun, silver for the night.
The cabochon measures approx 9mm in height.
Width is approx 1.3cm
Depth is approx 6mm
The ring is finished in a soft matte brushed finish.
The birch ring takes approximately 4 - 6 weeks to make. Please do contact me if you need one sooner.
Each one is handmade, as such there may be slight variations in detail. Please do check other birch tree rings to see variations in details.
Fully hallmarked, each comes boxed and wrapped.
If you are outside the UK I am more than happy to translate sizes - please contact me for details.